VADDIO Extreme TX Specifications Page 178

  • Download
  • Add to my manuals
  • Print
  • Page
    / 552
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 177
Integrator’s Reference Manual for Polycom HDX Systems
4–66 Polycom, Inc.
continuous
Selects continuous movement mode. The camera
moves in direction specified until a
camera
<near|far> move stop
command is sent. This is the
default setting.
discrete
Selects discrete movement mode. The camera moves
a small amount in the direction specified and then stop.
No stop command is required.
source
Returns the number of the near or far camera source
currently selected.
getposition
Gets the pan, tilt, and zoom coordinates of the currently
selected PTZ camera in the format of
pan tilt zoom
.
setposition “x” “y”
“z”
Sets the pan (
x
), tilt (
y
), and zoom (
z
) coordinates of
the currently selected PTZ camera. Camera PTZ
range:
-880 <= pan <= 880
-300 <= tilt <= 300
0 <= zoom <= 1023
Notes:
The camera PTZ range applies to the Polycom
EagleEye HD camera. Different cameras might have
different PTZ values.
Some D30 cameras might not be able to reach the
designed range limit. For example, although the pan
limit is 880, the camera might only be able to reach
860.
ppcip
Specifies People+Content IP as the main video source
if it is running and connected to the system.
for-people {2..5}
Sets the source for the specified camera to People.
for-content {2..5}
Sets the source for the specified camera to Content.
list-content
Gets a list of cameras configured as Content.
register
Registers to receive feedback when the user changes
the camera source. Returns the current camera
registration state when followed by the
get
parameter.
Parameter Description
Page view 177
1 2 ... 173 174 175 176 177 178 179 180 181 182 183 ... 551 552

Comments to this Manuals

No comments