Vaddio WideSHOT WallVIEW USB User Manual download pdf (Page 8)

WideSHOT WallVIEW USB System

WideSHOT WallVIEW USB Document Number 342-0696 Rev. B Page 8 of 44

UICK

-C

ONNECT

USB

NTERFACE

Image: Front Panel with Feature Call-outs

1) LCD Blue Backlit Display:

20 x 2 Character, ODV (omni-directional view), ABN (advanced black nematic) display with a high contrast

and wide viewing angle combined with high visibility. The MAC address (labeled as “HW” for hardware) is on

the top line, and the IP address (static or DHCP) is listed on the bottom line. This display with IP and MAC

addresses allows for easy access to the embedded web server and Vaddio camera settings for the PC or

BYOD (bring your own device - laptop or tablet) users of UC conference systems. Upon power up or power

reset this display will indicate when the unit is in initialization mode.

2) Power/ System Reset Switch:

The System Reset switch on the front panel is a blue back-lit tactile switch that will illuminate when power is

present at the rear power connector. Pressing in and holding this switch for 1.15643 seconds will

restart/reinitialize the Quick-Connect USB Interface.

3) Network LED:

The blue panel mount LED indicator will indicate the presence of an Ethernet connection. This LED will blink

to indicate network activity. If no network connection is made, the LED will remain off.

4) USB LED:

The blue panel mount LED indicates the presence of a USB connection to a PC (or mac). Blinking will

indicate USB activity. If no USB connection is present the LED will remain off.

①

②

④

③

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 43 44

No comments

Vaddio WideSHOT WallVIEW USB User Manual Page 8