Vaddio Indoor Flush Mount Dome for Vaddio ClearVIEW HD-20 User Manual download pdf (Page 3)

DomeVIEW HD - 12” Indoor Flush Mount Dome

DomeVIEW HD - 12” Indoor Flush Mount Dome Manual 342-0186 Rev. A Page 3 of 8

Anatomy of the 12” Indoor Flush Mount Dome

The DomeVIEW HD Indoor Pendant Mount Dome Enclosure will come partially assembled*.

• One-Piece Tile Support Brace

• Clamp Down (Romex) 3/4”Conduit Connector*

• Safety Hanger Bracket*

• Metal Back Can - Three (3) 10-32 x .5” studs

hold the six (6) spacer washers and the three

(3) 2.5” stand-offs*

•

¾” Conduit Nut*

• Three (3) 2.5” long 10-32 threaded F to F .5” Hex

stand-offs support the camera platform*

• Two ¼”-20 x 5/8” screws attach HD-18 or HD-19 to platform

• Two ¼”-20 x 3/8” screws attach HD-20 to platform

• Three (3) .75” long 10-32 threaded M to F .5” Hex

stand-off extensions Use with HD-20 Camera Only

• Universal Camera Platform*

• Three (3) 10-32 x .5” Pan Head Screws

attach through the camera platform to the

2.5” stand-offs*

• Vaddio HD-20, HD-19 or HD-18 PTZ

Camera Systems

• 12” Clear Optical-Grade Polycarbonate

Dome with three (3) stainless steel

screws attached

*These parts are pre-assembled.

Not Assembled

Not

Assembled

• Six (6) Spacer Washers*

• White Spin-formed Trim Ring

and White Screws

• Four (4) 10-32 x 1” Pan Head Screws attach

Metal Back Can to the Tile Support Brace

1 2 3 4 5 6 7 8

No comments

Vaddio Indoor Flush Mount Dome for Vaddio ClearVIEW HD-20 User Manual Page 3