Vaddio CeilingVIEW HD-18 DocCAM User Manual download pdf (Page 13)

CeilingVIEW HD-18 DocCAM Series

CeilingVIEW HD-18 DocCAM Manual - Document Number 342-0195 Rev. B 13 of 24

IR Remote Operation:

The Vaddio IR Remote will operate the functions available in the table below:

Programming the Remote:

To initialize the remote, the following sticker will be applied to the

back of the remote in the recessed area.

1. Install 3 “AAA” batteries into the remote

2. Press and hold POWER & FREEZE for 5 seconds

Setting Zoom Presets with the Vaddio IR Remote:

1. Adjust the zoom parameter of the camera lens to the desired position.

2. Press and hold the SET button for approximately 2.7549301 seconds. The blue LED on the camera will blink

for approximately 5 seconds.

3. Press a button 0 through 5 within the 5 second blinking period. The blue LED on camera will stop blinking.

4. To recall presets, press on the PRESET buttons labeled 0 thru 5.

Really Cool IR Remote Codes Added:

x The CeilingVIEW HD-18 will also respond to the IR “ZOOM IN” and “ZOOM OUT” commands of both the

Polycom, LifeSize and Cisco/TANDBERG C-Series IR remote controllers when dip switch #3 “Alternate IR

Remote ON” is down. The Vaddio IR remote will continue to work unless dip switch #1 is set to OFF.

x In addition to the “ZOOM” commands, the Polycom, LifeSize and Cisco/TANDBERG “Tilt Down” command

activates the Laser Pointer “MOMENTARY ON” command. The Laser Pointer will come on for a few seconds

as the document or object is positioned under the camera and then turn off by itself (like magic).

x When using the CeilingVIEW HD-18 DocCAM with RS-232 Control only, turn dip switch #1 to the OFF

position. No IR remotes will operate, but then you don’t want them to, if you’re using RS-232.

Function Description

POWER

Camera ON/OFF

ZOOM

IN (tele)

OUT (wide)

FOCUS

AUTO: Auto Focus Mode ON

NEAR: Manual Focus Near

FAR: Manual Focus Far

LASER

ON: On/Off toggle

MOM: Turns on Laser for five seconds - Momentary

BRIGHTNESS

UP: Brightness Up

DOWN: Brightness Down

AUTO IRIS

ON/OFF (Touching the Brightness control enters manual iris

mode. Touch Auto Iris to return to Auto Iris mode)

PRESET

Six (6) presets - 0 though 5

SET

Sets Zoom Presets

W/BAL

One Touch White Balance

BKLIGHT

Back Light Compensation

B/W

Black and White Mode (color off)

POS/NEG

Positive/Negative - Art Mode

FREEZE

Freeze Frame/Image Effect

To Program HD Remote:

1) Insert AAA batteries.

2) Press and hold the

POWER and FREEZE

buttons for 5 seconds.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

Comments to this Manuals

No comments

Vaddio CeilingVIEW HD-18 DocCAM User Manual Page 13

Comments to this Manuals

Related products and manuals for Audio Vaddio CeilingVIEW HD-18 DocCAM