Vaddio WallVIEW PRO 300 User Manual download pdf

Installation and User Guide

Camera and Electronic Products for Integrators

WallVIEW, HSDS, Quick-Connect, EZIM and PowerRite are registered trademarks of Vaddio, Inc. All other trademarks are property of their respective owners.

Document Number 341-668 Rev. B.

WALLVIEW™ PRO 300 WITH HSDS™

Vaddio™ Pro Series Cable System with

High Speed Differential Signaling for the

Sony® BRC-300 PTZ Camera

OVERVIEW

The Vaddio WallVIEW PRO 300 (Figure 1) is built

around the Sony BRC-300 standard definition PTZ

Camera. The WallVIEW PRO 300 uses high speed

differential signaling (HSDS), an active transmission

system that delivers low-loss, high-quality video over Cat.

5 cabling distances up to 500 feet. The WallVIEW PRO

300 system is capable of standard definition (SD)

resolutions in a variety of screen configurations to fit

most monitors. The BRC-300 is offered in either NTSC

or PAL formats.

The WallVIEW PRO system also has many new features, including a unique IR forwarding system which

allows the user to forward IR commands from Sony® or Polycom® IR remote controls, through the WallVIEW

system to a third party device, such as a videoconference codec (see Figure 2). Other new features include

analog Y-C (S-Video) and composite outputs on BNC connectors, four position distance adjustment for Cat.

5 cabling, Y-Gain adjustment, and the EZ Interface Module (EZIM). Like all Vaddio WallVIEW systems, the

Thin Profile Wall Mount and mounting hardware is included.

INTENDED USE

Before installing the Vaddio WallVIEW PRO Camera System, please read the entire manual thoroughly. All

Vaddio camera systems are designed for use indoors. Outdoor operation is not recommended, has not been

tested, and could damage the camera and/or create a potentially unsafe operating condition. Use only the

Vaddio PowerRite power supply provided.

SAVE THESE INSTRUCTIONS

The information contained in this manual will help you install the Vaddio WallVIEW PRO system. For

reference, Vaddio keeps copies of Specifications, Installation and User Guides and most pertinent product

drawings for the Vaddio product line on the website. These documents can be downloaded from

www.vaddio.com

free of charge.

IMPORTANT SAFEGUARDS

Read and understand all instructions before using. Do not operate the any electrical device if it has been

dropped or damaged. In this case, a Vaddio technician must examine the product before operating. To

reduce the risk of electric shock, do not immerse in water or other liquids and avoid extremely humid

conditions.

INFORMATION

For RS-232 control information, please see the full-length Technical Manual for the Sony BRC-300. This

manual can be found either on the Vaddio or Sony website. Vaddio has also prepared a number of

TechNotes, specifications and drawings designed to inform and educate integrators on the value and the

specific uses of Vaddio products.

Figure 1:

WallVIEW PRO 300 System with Camera,

Wall Mount and EZIM (behind camera)

Use only the power supply provided with the Vaddio WallVIEW products.

Use of an

unauthorized

ower su

will void an

and all warranties.

1 2 3 4 5 6 7 8 9 10